JP Australia, 2023

X-Winger PRO 2023

1330mm long · 4'4"

609mm wide

≈ 130mm thick · medium confidence

60litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Shorter and fuller than most. A round tail, a full nose and parallel rails.

derived · against the 225 other wing foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia X-Winger PRO 2023: every size as listed by JP Australia
size	length	width	thickness	weight
45 L	133 cm · 1330 mm	545 mm	≈ 109 mm · estimated	4.6 kg
60 L	133 cm · 1330 mm	609 mm	130 mm · medium confidence	5.3 kg
75 L	133 cm · 1330 mm	660 mm	≈ 150 mm · estimated	5.7 kg
85 L	141 cm · 1410 mm	670 mm	≈ 158 mm · estimated	6.2 kg
95 L	152 cm · 1520 mm	690 mm	≈ 159 mm · estimated	6.4 kg
105 L	168 cm · 1680 mm	710 mm	≈ 154 mm · estimated	6.9 kg
115 L	170 cm · 1700 mm	723 mm	≈ 164 mm · estimated	7.2 kg
125 L	183 cm · 1830 mm	750 mm	≈ 160 mm · estimated	7.5 kg
145 L	198 cm · 1980 mm	790 mm	≈ 162 mm · estimated	8.3 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia X-Winger PRO 60 L over up to four others, at one scale.

Compare with…

Generations

After it · 2024

The 2024 111 L is 10 mm longer and 33 mm narrower than the 2023 115 L. Open the 2024

listed length and width

2023 115 L 2024 111 L

The JP Australia X-Winger PRO over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 45 L outline · derived

53 %wide point, 708 mm from the tail

2.44length over width

478mm wide 12″ from the tail

6,214cm² of planform

Read off the 60 L outline · derived

53 %wide point, 708 mm from the tail

2.14length over width

545mm wide 12″ from the tail

7,080cm² of planform

Read off the 75 L outline · derived

53 %wide point, 708 mm from the tail

2.02length over width

579mm wide 12″ from the tail

7,525cm² of planform

Read off the 85 L outline · derived

53 %wide point, 751 mm from the tail

2.10length over width

581mm wide 12″ from the tail

8,098cm² of planform

Read off the 95 L outline · derived

53 %wide point, 809 mm from the tail

2.20length over width

589mm wide 12″ from the tail

8,991cm² of planform

Read off the 105 L outline · derived

53 %wide point, 895 mm from the tail

2.37length over width

594mm wide 12″ from the tail

10,225cm² of planform

Read off the 115 L outline · derived

53 %wide point, 905 mm from the tail

2.35length over width

604mm wide 12″ from the tail

10,536cm² of planform

Read off the 125 L outline · derived

53 %wide point, 975 mm from the tail

2.44length over width

617mm wide 12″ from the tail

11,766cm² of planform

Read off the 145 L outline · derived

53 %wide point, 1054 mm from the tail

2.51length over width

640mm wide 12″ from the tail

13,409cm² of planform

Rocker of the 45 L · scaled from the 60 L measured

38 mmtail rocker, at the tip

14 mm12″ from the tail

11 mm12″ from the nose

101 mmnose rocker, at the tip

317 mmflat to within 3 mm, from 43 % to 67 % of the length

50 %of the length to the lowest point, from the tail

109 mmat its thickest, 15 % from the tail

64 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 60 L · measured

38 mmtail rocker, at the tip

14 mm12″ from the tail

11 mm12″ from the nose

101 mmnose rocker, at the tip

317 mmflat to within 3 mm, from 43 % to 67 % of the length

50 %of the length to the lowest point, from the tail

130 mmat its thickest, 15 % from the tail

64 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 75 L · scaled from the 60 L measured

38 mmtail rocker, at the tip

14 mm12″ from the tail

11 mm12″ from the nose

101 mmnose rocker, at the tip

317 mmflat to within 3 mm, from 43 % to 67 % of the length

50 %of the length to the lowest point, from the tail

150 mmat its thickest, 15 % from the tail

64 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 85 L · scaled from the 60 L measured

42 mmtail rocker, at the tip

16 mm12″ from the tail

13 mm12″ from the nose

107 mmnose rocker, at the tip

328 mmflat to within 3 mm, from 43 % to 66 % of the length

50 %of the length to the lowest point, from the tail

158 mmat its thickest, 15 % from the tail

68 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 95 L · scaled from the 60 L measured

48 mmtail rocker, at the tip

19 mm12″ from the tail

17 mm12″ from the nose

117 mmnose rocker, at the tip

342 mmflat to within 3 mm, from 43 % to 66 % of the length

50 %of the length to the lowest point, from the tail

159 mmat its thickest, 15 % from the tail

73 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 105 L · scaled from the 60 L measured

56 mmtail rocker, at the tip

22 mm12″ from the tail

23 mm12″ from the nose

130 mmnose rocker, at the tip

363 mmflat to within 3 mm, from 44 % to 66 % of the length

50 %of the length to the lowest point, from the tail

154 mmat its thickest, 15 % from the tail

81 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 115 L · scaled from the 60 L measured

57 mmtail rocker, at the tip

23 mm12″ from the tail

24 mm12″ from the nose

132 mmnose rocker, at the tip

366 mmflat to within 3 mm, from 44 % to 66 % of the length

50 %of the length to the lowest point, from the tail

164 mmat its thickest, 15 % from the tail

82 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 125 L · scaled from the 60 L measured

62 mmtail rocker, at the tip

26 mm12″ from the tail

29 mm12″ from the nose

143 mmnose rocker, at the tip

385 mmflat to within 3 mm, from 44 % to 65 % of the length

50 %of the length to the lowest point, from the tail

160 mmat its thickest, 15 % from the tail

88 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 145 L · scaled from the 60 L measured

68 mmtail rocker, at the tip

29 mm12″ from the tail

35 mm12″ from the nose

156 mmnose rocker, at the tip

407 mmflat to within 3 mm, from 45 % to 65 % of the length

50 %of the length to the lowest point, from the tail

162 mmat its thickest, 15 % from the tail

95 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 60 L. Tail end set by Claude, not checked by a person.