Wing foil

JP Australia, 2022

X-Winger 2022

1330mm long · 4'4"

609mm wide

≈ 97mm thick · estimated

60litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Narrower than the 2021. The 60 L is 51 mm narrower than the 2021 75 L, same length.

60 L against the 2021 75 L, listed length and width.

As listed by JP Australia

JP Australia X-Winger 2022: every size as listed by JP Australia
sizelengthwidththicknessweight
45 L133 cm · 1330 mm545 mm≈ 81 mm · estimated4.6–5.6 kg
60 L133 cm · 1330 mm609 mm≈ 97 mm · estimated5.3–6 kg
75 L133 cm · 1330 mm660 mm≈ 112 mm · estimated5.7–6.2 kg
95 L152 cm · 1520 mm690 mm≈ 119 mm · estimated6.4–7 kg
105 L168 cm · 1680 mm710 mm≈ 115 mm · estimated6.9–7.5 kg
115 L170 cm · 1700 mm723 mm≈ 123 mm · estimated7.2–8 kg
125 L183 cm · 1830 mm750 mm≈ 119 mm · estimated7.5–8.4 kg
145 L198 cm · 1980 mm790 mm≈ 122 mm · estimated8.3–9.3 kg

Every size side by side, tails on one line, one scale

198013300 mm133045 L545 w133060 L621 w133075 L660 w152095 L690 w1680105 L710 w1700115 L723 w1830125 L750 w1980145 L790 w

Next to your board?

Lay the JP Australia X-Winger 60 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2021

The 2022 60 L is 51 mm narrower than the 2021 75 L, same length; its wide point moved 25 mm toward the nose. Open the 2021

listed length and width · wide point derived

2022 60 L over the 2021 75 L, tails aligned, one scale
2022 60 L 2021 75 L

The JP Australia X-Winger over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia X-Winger 2022 from above and from the side, every size at true scale, tails aligned
JP Australia X-Winger 2022 from the side, true proportions: the bottom's rocker over a flat table, every size; borrowed (≈), drawn hollow

Read off the 45 L outline · derived

54 %wide point, 721 mm from the tail

2.44length over width

478mm wide 12″ from the tail

6,218cm² of planform

Read off the 60 L outline · derived

54 %wide point, 721 mm from the tail

2.14length over width

544mm wide 12″ from the tail

7,079cm² of planform

Read off the 75 L outline · derived

54 %wide point, 721 mm from the tail

2.02length over width

579mm wide 12″ from the tail

7,530cm² of planform

Read off the 95 L outline · derived

54 %wide point, 824 mm from the tail

2.20length over width

589mm wide 12″ from the tail

8,997cm² of planform

Read off the 105 L outline · derived

54 %wide point, 911 mm from the tail

2.37length over width

594mm wide 12″ from the tail

10,232cm² of planform

Read off the 115 L outline · derived

54 %wide point, 922 mm from the tail

2.35length over width

604mm wide 12″ from the tail

10,543cm² of planform

Read off the 125 L outline · derived

54 %wide point, 993 mm from the tail

2.44length over width

618mm wide 12″ from the tail

11,773cm² of planform

Read off the 145 L outline · derived

54 %wide point, 1074 mm from the tail

2.51length over width

641mm wide 12″ from the tail

13,418cm² of planform

Rocker of the 45 L · scaled from the 60 L, borrowed (≈), estimated

≈ 32 mmtail rocker, at the tip
≈ 6 mm12″ from the tail
≈ 15 mm12″ from the nose
≈ 91 mmnose rocker, at the tip
≈ 415 mmflat to within 3 mm, from 32 % to 63 % of the length
48 %of the length to the lowest point, from the tail
≈ 81 mmat its thickest, 52 % from the tail
≈ 31 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 60 L · borrowed (≈), estimated

≈ 32 mmtail rocker, at the tip
≈ 6 mm12″ from the tail
≈ 15 mm12″ from the nose
≈ 91 mmnose rocker, at the tip
≈ 415 mmflat to within 3 mm, from 32 % to 63 % of the length
48 %of the length to the lowest point, from the tail
≈ 97 mmat its thickest, 52 % from the tail
≈ 31 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 75 L · scaled from the 60 L, borrowed (≈), estimated

≈ 32 mmtail rocker, at the tip
≈ 6 mm12″ from the tail
≈ 15 mm12″ from the nose
≈ 91 mmnose rocker, at the tip
≈ 415 mmflat to within 3 mm, from 32 % to 63 % of the length
48 %of the length to the lowest point, from the tail
≈ 112 mmat its thickest, 52 % from the tail
≈ 31 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 95 L · scaled from the 60 L, borrowed (≈), estimated

≈ 38 mmtail rocker, at the tip
≈ 8 mm12″ from the tail
≈ 22 mm12″ from the nose
≈ 105 mmnose rocker, at the tip
≈ 443 mmflat to within 3 mm, from 33 % to 62 % of the length
48 %of the length to the lowest point, from the tail
≈ 119 mmat its thickest, 52 % from the tail
≈ 36 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 105 L · scaled from the 60 L, borrowed (≈), estimated

≈ 43 mmtail rocker, at the tip
≈ 10 mm12″ from the tail
≈ 29 mm12″ from the nose
≈ 117 mmnose rocker, at the tip
≈ 464 mmflat to within 3 mm, from 34 % to 62 % of the length
48 %of the length to the lowest point, from the tail
≈ 115 mmat its thickest, 52 % from the tail
≈ 40 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 115 L · scaled from the 60 L, borrowed (≈), estimated

≈ 44 mmtail rocker, at the tip
≈ 10 mm12″ from the tail
≈ 30 mm12″ from the nose
≈ 119 mmnose rocker, at the tip
≈ 466 mmflat to within 3 mm, from 34 % to 62 % of the length
48 %of the length to the lowest point, from the tail
≈ 123 mmat its thickest, 52 % from the tail
≈ 40 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 125 L · scaled from the 60 L, borrowed (≈), estimated

≈ 48 mmtail rocker, at the tip
≈ 11 mm12″ from the tail
≈ 36 mm12″ from the nose
≈ 129 mmnose rocker, at the tip
≈ 480 mmflat to within 3 mm, from 35 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 119 mmat its thickest, 52 % from the tail
≈ 43 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 145 L · scaled from the 60 L, borrowed (≈), estimated

≈ 53 mmtail rocker, at the tip
≈ 13 mm12″ from the tail
≈ 43 mm12″ from the nose
≈ 140 mmnose rocker, at the tip
≈ 494 mmflat to within 3 mm, from 36 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 122 mmat its thickest, 52 % from the tail
≈ 47 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 103 hard wing boards from 67 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived