JP Australia, 2026

Xr Ipr 2026

1700mm long · 5'7"

640mm wide

111mm thick

89litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Its width sits further back. A round tail, a medium nose and parallel rails.

derived · against the 225 other wing foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Xr Ipr 2026: every size as listed by JP Australia
size	length	width	thickness	weight
69 L	155 cm · 1550 mm	580 mm	104 mm	6.5 kg
79 L	163 cm · 1630 mm	610 mm	108 mm	6.9 kg
89 L	170 cm · 1700 mm	640 mm	111 mm	7.5 kg
99 L	178 cm · 1780 mm	660 mm	114 mm	8 kg
109 L	185 cm · 1850 mm	690 mm	116 mm	8.4 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia Xr Ipr 89 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 69 L outline · derived

50 %wide point, 775 mm from the tail

2.67length over width

507mm wide 12″ from the tail

7,485cm² of planform

Read off the 79 L outline · derived

50 %wide point, 815 mm from the tail

2.67length over width

528mm wide 12″ from the tail

8,278cm² of planform

Read off the 89 L outline · derived

50 %wide point, 850 mm from the tail

2.70length over width

540mm wide 12″ from the tail

8,914cm² of planform

Read off the 99 L outline · derived

50 %wide point, 890 mm from the tail

2.70length over width

560mm wide 12″ from the tail

9,781cm² of planform

Read off the 109 L outline · derived

50 %wide point, 925 mm from the tail

2.68length over width

580mm wide 12″ from the tail

10,628cm² of planform

Rocker of the 69 L · scaled from the 89 L measured

34 mmtail rocker, at the tip

12 mm12″ from the tail

21 mm12″ from the nose

85 mmnose rocker, at the tip

437 mmflat to within 3 mm, from 34 % to 62 % of the length

48 %of the length to the lowest point, from the tail

132 mmat its thickest, 44 % from the tail

40 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 79 L · scaled from the 89 L measured

36 mmtail rocker, at the tip

13 mm12″ from the tail

24 mm12″ from the nose

89 mmnose rocker, at the tip

450 mmflat to within 3 mm, from 34 % to 62 % of the length

48 %of the length to the lowest point, from the tail

137 mmat its thickest, 44 % from the tail

42 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 89 L · measured

39 mmtail rocker, at the tip

14 mm12″ from the tail

27 mm12″ from the nose

94 mmnose rocker, at the tip

461 mmflat to within 3 mm, from 35 % to 62 % of the length

48 %of the length to the lowest point, from the tail

141 mmat its thickest, 44 % from the tail · on the photo; JP Australia lists 111 mm

43 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 99 L · scaled from the 89 L measured

41 mmtail rocker, at the tip

16 mm12″ from the tail

30 mm12″ from the nose

99 mmnose rocker, at the tip

473 mmflat to within 3 mm, from 35 % to 62 % of the length

48 %of the length to the lowest point, from the tail

145 mmat its thickest, 44 % from the tail

45 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 109 L · scaled from the 89 L measured

43 mmtail rocker, at the tip

17 mm12″ from the tail

33 mm12″ from the nose

103 mmnose rocker, at the tip

483 mmflat to within 3 mm, from 35 % to 61 % of the length

48 %of the length to the lowest point, from the tail

147 mmat its thickest, 44 % from the tail

47 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 89 L. Tail end set by Claude, not checked by a person.