JP Australia, 2026

X-Winger Pro 2026

1860mm long · 6'1"

710mm wide

125mm thick

122litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Its width sits further back. A round tail, a medium nose and parallel rails.

derived · against the 169 other wing foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia X-Winger Pro 2026: every size as listed by JP Australia
size	length	width	thickness	weight
122 L	186 cm · 1860 mm	710 mm	125 mm	7.3 kg
133 L	191 cm · 1910 mm	740 mm	125 mm	8 kg
144 L	198 cm · 1980 mm	760 mm	127 mm	8.4 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia X-Winger Pro 122 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 122 L outline · derived

51 %wide point, 940 mm from the tail

2.61length over width

602mm wide 12″ from the tail

11,104cm² of planform

Read off the 133 L outline · derived

51 %wide point, 965 mm from the tail

2.58length over width

621mm wide 12″ from the tail

11,844cm² of planform

Read off the 144 L outline · derived

51 %wide point, 1000 mm from the tail

2.61length over width

633mm wide 12″ from the tail

12,610cm² of planform

Rocker of the 122 L · borrowed (≈), estimated

≈ 48 mmtail rocker, at the tip

≈ 10 mm12″ from the tail

≈ 38 mm12″ from the nose

≈ 133 mmnose rocker, at the tip

≈ 500 mmflat to within 3 mm, from 35 % to 61 % of the length

50 %of the length to the lowest point, from the tail

≈ 125 mmat its thickest, 53 % from the tail

≈ 44 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 133 L · scaled from the 122 L, borrowed (≈), estimated

≈ 50 mmtail rocker, at the tip

≈ 10 mm12″ from the tail

≈ 40 mm12″ from the nose

≈ 137 mmnose rocker, at the tip

≈ 505 mmflat to within 3 mm, from 35 % to 61 % of the length

50 %of the length to the lowest point, from the tail

≈ 125 mmat its thickest, 53 % from the tail

≈ 45 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 144 L · scaled from the 122 L, borrowed (≈), estimated

≈ 52 mmtail rocker, at the tip

≈ 11 mm12″ from the tail

≈ 44 mm12″ from the nose

≈ 142 mmnose rocker, at the tip

≈ 512 mmflat to within 3 mm, from 35 % to 61 % of the length

50 %of the length to the lowest point, from the tail

≈ 127 mmat its thickest, 53 % from the tail

≈ 46 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 88 hard wing boards from 56 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated