Wing foil

JP Australia, 2026

X-Winger IPR 2026

1860mm long · 6'1"

710mm wide

125mm thick

122litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2025 outline, refined. The 122 L is the same length and width as the 2025 122 L.

122 L against the 2025 122 L, listed length and width.

As listed by JP Australia

JP Australia X-Winger IPR 2026: every size as listed by JP Australia
sizelengthwidththicknessweight
122 L186 cm · 1860 mm710 mm125 mm8.6 kg
133 L191 cm · 1910 mm740 mm125 mm9.1 kg
144 L198 cm · 1980 mm760 mm127 mm9.3 kg

Every size side by side, tails on one line, one scale

198018600 mm1860122 L713 w1910133 L740 w1980144 L760 w

Next to your board?

Lay the JP Australia X-Winger IPR 122 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2025

The 2026 122 L is the same length and width as the 2025 122 L; its wide point moved 75 mm toward the nose. Open the 2025

listed length and width · wide point derived

2026 122 L over the 2025 122 L, tails aligned, one scale
2026 122 L 2025 122 L

The JP Australia X-Winger IPR over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia X-Winger IPR 2026 from above and from the side, every size at true scale, tails aligned
JP Australia X-Winger IPR 2026 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 122 L outline · derived

53 %wide point, 988 mm from the tail

2.61length over width

598mm wide 12″ from the tail

11,115cm² of planform

Read off the 133 L outline · derived

53 %wide point, 1015 mm from the tail

2.58length over width

617mm wide 12″ from the tail

11,847cm² of planform

Read off the 144 L outline · derived

53 %wide point, 1052 mm from the tail

2.61length over width

629mm wide 12″ from the tail

12,613cm² of planform

Rocker of the 122 L · measured

71 mmtail rocker, at the tip
24 mm12″ from the tail
22 mm12″ from the nose
95 mmnose rocker, at the tip
425 mmflat to within 3 mm, from 43 % to 65 % of the length
55 %of the length to the lowest point, from the tail
167 mmat its thickest, 48 % from the tail · on the photo; JP Australia lists 125 mm
52 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 133 L · scaled from the 122 L measured

74 mmtail rocker, at the tip
25 mm12″ from the tail
23 mm12″ from the nose
98 mmnose rocker, at the tip
429 mmflat to within 3 mm, from 43 % to 65 % of the length
55 %of the length to the lowest point, from the tail
167 mmat its thickest, 48 % from the tail
54 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 144 L · scaled from the 122 L measured

77 mmtail rocker, at the tip
26 mm12″ from the tail
26 mm12″ from the nose
102 mmnose rocker, at the tip
435 mmflat to within 3 mm, from 43 % to 65 % of the length
55 %of the length to the lowest point, from the tail
170 mmat its thickest, 48 % from the tail
56 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 122 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived