Slingshot, 2026

Copycat Pro 2026

1500mm long · 4'11"

450mm wide

≈ 16mm thick · a guess

–litres

Open in Studio See it on slingshotsports.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Its width sits further back. A round tail, a full nose and parallel rails.

derived · against the 17 other wakeboard boards in the atlas, read off the outlines.

As listed by Slingshot

Slingshot Copycat Pro 2026: every size as listed by Slingshot
size	length	width	thickness	weight
138 × 43.7 cm	138 cm · 1380 mm	437 mm	≈ 16 mm · a guess	3.5 kg
144 × 44.9 cm	144 cm · 1440 mm	449 mm	≈ 16 mm · a guess	3.6 kg
150 × 45 cm	150 cm · 1500 mm	450 mm	≈ 16 mm · a guess	3.8 kg
156 × 45 cm	156 cm · 1560 mm	450 mm	≈ 16 mm · a guess	4.1 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the Slingshot Copycat Pro 150 × 45 cm over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 138 × 43.7 cm outline · derived

50 %wide point, 685 mm from the tail

3.16length over width

397mm wide 12″ from the tail

5,317cm² of planform

Read off the 144 × 44.9 cm outline · derived

50 %wide point, 714 mm from the tail

3.21length over width

405mm wide 12″ from the tail

5,701cm² of planform

Read off the 150 × 45 cm outline · derived

50 %wide point, 744 mm from the tail

3.36length over width

400mm wide 12″ from the tail

5,901cm² of planform

Read off the 156 × 45 cm outline · derived

50 %wide point, 774 mm from the tail

3.47length over width

400mm wide 12″ from the tail

6,190cm² of planform

Rocker of the 138 × 43.7 cm · scaled from the 150 × 45 cm, borrowed (≈), estimated

≈ 62 mmtail rocker, at the tip

≈ 16 mm12″ from the tail

≈ 17 mm12″ from the nose

≈ 62 mmnose rocker, at the tip

≈ 298 mmflat to within 3 mm, from 36 % to 57 % of the length

48 %of the length to the lowest point, from the tail

≈ 16 mmat its thickest, 50 % from the tail

≈ 10 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 144 × 44.9 cm · scaled from the 150 × 45 cm, borrowed (≈), estimated

≈ 65 mmtail rocker, at the tip

≈ 18 mm12″ from the tail

≈ 20 mm12″ from the nose

≈ 65 mmnose rocker, at the tip

≈ 306 mmflat to within 3 mm, from 36 % to 57 % of the length

48 %of the length to the lowest point, from the tail

≈ 16 mmat its thickest, 50 % from the tail

≈ 11 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 150 × 45 cm · borrowed (≈), estimated

≈ 68 mmtail rocker, at the tip

≈ 20 mm12″ from the tail

≈ 22 mm12″ from the nose

≈ 67 mmnose rocker, at the tip

≈ 315 mmflat to within 3 mm, from 36 % to 57 % of the length

48 %of the length to the lowest point, from the tail

≈ 16 mmat its thickest, 50 % from the tail

≈ 11 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 156 × 45 cm · scaled from the 150 × 45 cm, borrowed (≈), estimated

≈ 71 mmtail rocker, at the tip

≈ 23 mm12″ from the tail

≈ 24 mm12″ from the nose

≈ 70 mmnose rocker, at the tip

≈ 324 mmflat to within 3 mm, from 36 % to 57 % of the length

48 %of the length to the lowest point, from the tail

≈ 16 mmat its thickest, 50 % from the tail

≈ 12 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · Read off Slingshot's photo of this board, rejected: silhouette 13 px thick along its middle, under 18: too thin for a segmentation mask to read a thickness curve (the mask keeps the dark part of so thin a strip); rocker only. Tail end set by Slingshot's photo convention, not checked by a person. · estimated