Slingshot, 2023

Space Melter 2023

1650mm long · 5'5"

419mm wide

≈ 16mm thick · a guess

–litres

Open in Studio See it on slingshotsports.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Longer and leaner than most. A round tail, a full nose and parallel rails.

derived · against the 17 other wakeboard boards in the atlas, read off the outlines.

As listed by Slingshot

Slingshot Space Melter 2023: every size as listed by Slingshot
size	length	width	thickness	weight
150 × 42 cm	150 cm · 1500 mm	420 mm	≈ 16 mm · a guess	3.8 kg
165 × 41.9 cm	165 cm · 1650 mm	419 mm	≈ 16 mm · a guess	4 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the Slingshot Space Melter 165 × 41.9 cm over up to four others, at one scale.

Compare with…

Generations

After it · 2025

The 2025 150 × 39.3 cm is 27 mm narrower than the 2023 150 × 42 cm, same length; its wide point moved 789 mm toward the tail. Open the 2025

listed length and width · wide point derived

2023 150 × 42 cm 2025 150 × 39.3 cm

The Slingshot Space Melter over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 150 × 42 cm outline · derived

76 %wide point, 1141 mm from the tail

3.57length over width

409mm wide 12″ from the tail

5,651cm² of planform

Read off the 165 × 41.9 cm outline · derived

76 %wide point, 1255 mm from the tail

3.99length over width

400mm wide 12″ from the tail

6,115cm² of planform

Rocker of the 150 × 42 cm · scaled from the 165 × 41.9 cm, borrowed (≈), estimated

≈ 81 mmtail rocker, at the tip

≈ 20 mm12″ from the tail

≈ 18 mm12″ from the nose

≈ 77 mmnose rocker, at the tip

≈ 341 mmflat to within 3 mm, from 40 % to 63 % of the length

52 %of the length to the lowest point, from the tail

≈ 16 mmat its thickest, 50 % from the tail

≈ 19 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 165 × 41.9 cm · borrowed (≈), estimated

≈ 90 mmtail rocker, at the tip

≈ 25 mm12″ from the tail

≈ 23 mm12″ from the nose

≈ 85 mmnose rocker, at the tip

≈ 351 mmflat to within 3 mm, from 41 % to 62 % of the length

52 %of the length to the lowest point, from the tail

≈ 16 mmat its thickest, 50 % from the tail

≈ 21 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · Read off Slingshot's photo of this board, rejected: silhouette 14 px thick along its middle, under 18: too thin for a segmentation mask to read a thickness curve (the mask keeps the dark part of so thin a strip); rocker only. Tail end set by Slingshot's photo convention, not checked by a person. · estimated