Stand-up paddle

JP Australia, 2020

Flatwater Race 2020

4260mm long · 14'0"

585mm wide

268mm thick

262litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A finer nose than most. A square tail, a pointed nose and curvy rails.

derived · against the 303 other sup boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Flatwater Race 2020: every size as listed by JP Australia
sizelengthwidththicknessweight
243 L426 cm · 4260 mm549 mm268 mm11.3 kg
262 L426 cm · 4260 mm585 mm268 mm12 kg
284 L426 cm · 4260 mm635 mm268 mm12.4 kg

Every size side by side, tails on one line, one scale

42600 mm4260243 L549 w4260262 L593 w4260284 L635 w

Next to your board?

Lay the JP Australia Flatwater Race 262 L over up to four others, at one scale.

Compare with…

Generations

After it · 2021

The 2021 262 L is the same length and width as the 2020 262 L. Open the 2021

listed length and width

2020 262 L over the 2021 262 L, tails aligned, one scale
2020 262 L 2021 262 L

The JP Australia Flatwater Race over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Flatwater Race 2020 from above and from the side, every size at true scale, tails aligned
JP Australia Flatwater Race 2020 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 243 L outline · derived

45 %wide point, 1899 mm from the tail

7.76length over width

378mm wide 12″ from the tail

17,548cm² of planform

Read off the 262 L outline · derived

45 %wide point, 1899 mm from the tail

7.18length over width

408mm wide 12″ from the tail

18,967cm² of planform

Read off the 284 L outline · derived

45 %wide point, 1899 mm from the tail

6.71length over width

437mm wide 12″ from the tail

20,296cm² of planform

Rocker of the 243 L · scaled from the 262 L measured

31 mmtail rocker, at the tip
0 mm12″ from the tail
84 mm12″ from the nose
168 mmnose rocker, at the tip
148 mmflat to within 3 mm, from 5 % to 9 % of the length
7 %of the length to the lowest point, from the tail
257 mmat its thickest, 61 % from the tail
91 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 262 L · measured

31 mmtail rocker, at the tip
0 mm12″ from the tail
84 mm12″ from the nose
168 mmnose rocker, at the tip
148 mmflat to within 3 mm, from 5 % to 9 % of the length
7 %of the length to the lowest point, from the tail
257 mmat its thickest, 61 % from the tail · on the photo; JP Australia lists 268 mm
91 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 284 L · scaled from the 262 L measured

31 mmtail rocker, at the tip
0 mm12″ from the tail
84 mm12″ from the nose
168 mmnose rocker, at the tip
148 mmflat to within 3 mm, from 5 % to 9 % of the length
7 %of the length to the lowest point, from the tail
257 mmat its thickest, 61 % from the tail
91 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 262 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived