JP Australia, 2020

Longboard 2020

3190mm long · 10'6"

760mm wide

108mm thick

160litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A fuller nose than most. A rounded pin tail, a full nose and parallel rails.

derived · against the 303 other sup boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Longboard 2020: every size as listed by JP Australia
size	length	width	thickness	weight
130 L	290 cm · 2900 mm	710 mm	99 mm	8.6 kg
149 L	305 cm · 3050 mm	740 mm	108 mm	9.3 kg
160 L	319 cm · 3190 mm	760 mm	108 mm	10.3 kg
209 L	350 cm · 3500 mm	790 mm	108 mm · medium confidence	12.1 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia Longboard 160 L over up to four others, at one scale.

Compare with…

Generations

After it · 2021

The 2021 160 L is the same length and width as the 2020 160 L; its wide point moved 42 mm toward the tail. Open the 2021

listed length and width · wide point derived

2020 160 L 2021 160 L

The JP Australia Longboard over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 130 L outline · derived

51 %wide point, 1465 mm from the tail

4.08length over width

439mm wide 12″ from the tail

16,793cm² of planform

Read off the 149 L outline · derived

51 %wide point, 1541 mm from the tail

4.12length over width

447mm wide 12″ from the tail

18,408cm² of planform

Read off the 160 L outline · derived

51 %wide point, 1612 mm from the tail

4.02length over width

469mm wide 12″ from the tail

20,642cm² of planform

Read off the 209 L outline · derived

51 %wide point, 1769 mm from the tail

4.43length over width

446mm wide 12″ from the tail

22,551cm² of planform

Rocker of the 130 L · scaled from the 160 L measured

72 mmtail rocker, at the tip

40 mm12″ from the tail

67 mm12″ from the nose

157 mmnose rocker, at the tip

693 mmflat to within 3 mm, from 39 % to 63 % of the length

48 %of the length to the lowest point, from the tail

98 mmat its thickest, 42 % from the tail

23 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 149 L · scaled from the 160 L measured

76 mmtail rocker, at the tip

43 mm12″ from the tail

73 mm12″ from the nose

165 mmnose rocker, at the tip

719 mmflat to within 3 mm, from 39 % to 63 % of the length

48 %of the length to the lowest point, from the tail

107 mmat its thickest, 42 % from the tail

24 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 160 L · measured

79 mmtail rocker, at the tip

46 mm12″ from the tail

78 mm12″ from the nose

173 mmnose rocker, at the tip

744 mmflat to within 3 mm, from 40 % to 63 % of the length

48 %of the length to the lowest point, from the tail

107 mmat its thickest, 42 % from the tail

25 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 209 L · scaled from the 160 L measured

87 mmtail rocker, at the tip

53 mm12″ from the tail

93 mm12″ from the nose

190 mmnose rocker, at the tip

797 mmflat to within 3 mm, from 40 % to 63 % of the length

48 %of the length to the lowest point, from the tail

107 mmat its thickest, 42 % from the tail

28 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 160 L. Tail end set by Claude, not checked by a person.