JP Australia, 2021

Longboard 2021

3190mm long · 10'6"

760mm wide

108mm thick

160litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2020 outline, refined. The 160 L is the same length and width as the 2020 160 L.

160 L against the 2020 160 L, listed length and width.

As listed by JP Australia

JP Australia Longboard 2021: every size as listed by JP Australia
size	length	width	thickness	weight
130 L	290 cm · 2900 mm	710 mm	99 mm	8.8 kg
149 L	305 cm · 3050 mm	740 mm	108 mm	9 kg
160 L	319 cm · 3190 mm	760 mm	108 mm	9.7 kg
209 L	350 cm · 3500 mm	790 mm	108 mm · medium confidence	11.5 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia Longboard 160 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2020

The 2021 160 L is the same length and width as the 2020 160 L; its wide point moved 42 mm toward the tail. Open the 2020

listed length and width · wide point derived

2021 160 L 2020 160 L

After it · 2022

The 2022 130 L is the same length and width as the 2021 130 L; its wide point moved 37 mm toward the nose. Open the 2022

listed length and width · wide point derived

2021 130 L 2022 130 L

The JP Australia Longboard over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 130 L outline · derived

49 %wide point, 1427 mm from the tail

4.08length over width

443mm wide 12″ from the tail

16,839cm² of planform

Read off the 149 L outline · derived

49 %wide point, 1501 mm from the tail

4.12length over width

451mm wide 12″ from the tail

18,459cm² of planform

Read off the 160 L outline · derived

49 %wide point, 1570 mm from the tail

4.17length over width

458mm wide 12″ from the tail

19,963cm² of planform

Read off the 209 L outline · derived

49 %wide point, 1723 mm from the tail

4.43length over width

453mm wide 12″ from the tail

22,613cm² of planform

Rocker of the 130 L · scaled from the 160 L measured

100 mmtail rocker, at the tip

56 mm12″ from the tail

58 mm12″ from the nose

127 mmnose rocker, at the tip

522 mmflat to within 3 mm, from 43 % to 61 % of the length

58 %of the length to the lowest point, from the tail

103 mmat its thickest, 44 % from the tail

21 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 149 L · scaled from the 160 L measured

105 mmtail rocker, at the tip

61 mm12″ from the tail

64 mm12″ from the nose

134 mmnose rocker, at the tip

542 mmflat to within 3 mm, from 43 % to 61 % of the length

58 %of the length to the lowest point, from the tail

113 mmat its thickest, 44 % from the tail

22 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 160 L · measured

110 mmtail rocker, at the tip

65 mm12″ from the tail

68 mm12″ from the nose

140 mmnose rocker, at the tip

560 mmflat to within 3 mm, from 43 % to 61 % of the length

58 %of the length to the lowest point, from the tail

113 mmat its thickest, 44 % from the tail · on the photo; JP Australia lists 108 mm

23 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 209 L · scaled from the 160 L measured

121 mmtail rocker, at the tip

75 mm12″ from the tail

80 mm12″ from the nose

154 mmnose rocker, at the tip

600 mmflat to within 3 mm, from 44 % to 61 % of the length

58 %of the length to the lowest point, from the tail

113 mmat its thickest, 44 % from the tail

25 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 160 L. Tail end set by Claude, not checked by a person.