JP Australia, 2025

Longboard WE 2025

2900mm long · 9'6"

710mm wide

99mm thick

130litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2024 outline, refined. The 130 L is the same length and width as the 2024 130 L.

130 L against the 2024 130 L, listed length and width.

As listed by JP Australia

JP Australia Longboard WE 2025: every size as listed by JP Australia
size	length	width	thickness	weight
130 L	290 cm · 2900 mm	710 mm	99 mm	8.6 kg
149 L	305 cm · 3050 mm	740 mm	108 mm	9.5 kg
160 L	319 cm · 3190 mm	760 mm	108 mm	10.3 kg
209 L	350 cm · 3500 mm	790 mm	108 mm · medium confidence	11.9 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia Longboard WE 130 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2024

The 2025 130 L is the same length and width as the 2024 130 L. Open the 2024

listed length and width

2025 130 L 2024 130 L

After it · 2026

The 2026 130 L is the same length and width as the 2025 130 L. Open the 2026

listed length and width

2025 130 L 2026 130 L

The JP Australia Longboard WE over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 130 L outline · derived

49 %wide point, 1425 mm from the tail

4.13length over width

428mm wide 12″ from the tail

16,539cm² of planform

Read off the 149 L outline · derived

49 %wide point, 1499 mm from the tail

4.12length over width

440mm wide 12″ from the tail

18,342cm² of planform

Read off the 160 L outline · derived

49 %wide point, 1568 mm from the tail

4.20length over width

442mm wide 12″ from the tail

19,702cm² of planform

Read off the 209 L outline · derived

49 %wide point, 1720 mm from the tail

4.43length over width

438mm wide 12″ from the tail

22,470cm² of planform

Rocker of the 130 L · measured

112 mmtail rocker, at the tip

60 mm12″ from the tail

62 mm12″ from the nose

143 mmnose rocker, at the tip

485 mmflat to within 3 mm, from 43 % to 60 % of the length

48 %of the length to the lowest point, from the tail

112 mmat its thickest, 43 % from the tail · on the photo; JP Australia lists 99 mm

30 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 149 L · scaled from the 130 L measured

118 mmtail rocker, at the tip

65 mm12″ from the tail

68 mm12″ from the nose

150 mmnose rocker, at the tip

496 mmflat to within 3 mm, from 43 % to 60 % of the length

48 %of the length to the lowest point, from the tail

122 mmat its thickest, 43 % from the tail

32 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 160 L · scaled from the 130 L measured

123 mmtail rocker, at the tip

70 mm12″ from the tail

73 mm12″ from the nose

158 mmnose rocker, at the tip

506 mmflat to within 3 mm, from 44 % to 59 % of the length

48 %of the length to the lowest point, from the tail

122 mmat its thickest, 43 % from the tail

33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 209 L · scaled from the 130 L measured

135 mmtail rocker, at the tip

80 mm12″ from the tail

85 mm12″ from the nose

174 mmnose rocker, at the tip

528 mmflat to within 3 mm, from 44 % to 59 % of the length

48 %of the length to the lowest point, from the tail

122 mmat its thickest, 43 % from the tail

36 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 130 L. Tail end set by rule.