Wing foil

JP Australia, 2026

WingAir SE 2026

1520mm long · 5'0"

670mm wide

130mm thick

100litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2025 outline, refined. The 100 L is the same length and width as the 2025 100 L.

100 L against the 2025 100 L, listed length and width.

As listed by JP Australia

JP Australia WingAir SE 2026: every size as listed by JP Australia
sizelengthwidththicknessweight
100 L152 cm · 1520 mm670 mm130 mm7.2 kg
110 L165 cm · 1650 mm700 mm130 mm7.7 kg
130 L183 cm · 1830 mm720 mm130 mm8.4 kg

Every size side by side, tails on one line, one scale

183015200 mm1520100 L665 w1650110 L700 w1830130 L720 w

Next to your board?

Lay the JP Australia WingAir SE 100 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2025

The 2026 100 L is the same length and width as the 2025 100 L. Open the 2025

listed length and width

2026 100 L over the 2025 100 L, tails aligned, one scale
2026 100 L 2025 100 L

The JP Australia WingAir SE over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia WingAir SE 2026 from above and from the side, every size at true scale, tails aligned
JP Australia WingAir SE 2026 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 100 L outline · derived

56 %wide point, 850 mm from the tail

2.29length over width

565mm wide 12″ from the tail

8,623cm² of planform

Read off the 110 L outline · derived

56 %wide point, 923 mm from the tail

2.36length over width

586mm wide 12″ from the tail

9,858cm² of planform

Read off the 130 L outline · derived

56 %wide point, 1024 mm from the tail

2.54length over width

592mm wide 12″ from the tail

11,246cm² of planform

Rocker of the 100 L · measured

31 mmtail rocker, at the tip
4 mm12″ from the tail
11 mm12″ from the nose
78 mmnose rocker, at the tip
706 mmflat to within 3 mm, from 24 % to 71 % of the length
58 %of the length to the lowest point, from the tail
172 mmat its thickest, 14 % from the tail · on the photo; JP Australia lists 130 mm
73 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 110 L · scaled from the 100 L measured

36 mmtail rocker, at the tip
5 mm12″ from the tail
14 mm12″ from the nose
86 mmnose rocker, at the tip
748 mmflat to within 3 mm, from 25 % to 70 % of the length
58 %of the length to the lowest point, from the tail
172 mmat its thickest, 14 % from the tail
79 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 130 L · scaled from the 100 L measured

49 mmtail rocker, at the tip
6 mm12″ from the tail
18 mm12″ from the nose
97 mmnose rocker, at the tip
723 mmflat to within 3 mm, from 26 % to 65 % of the length
58 %of the length to the lowest point, from the tail
172 mmat its thickest, 14 % from the tail
88 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 100 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived