Wing foil

JP Australia, 2025

F-Winger Pro 2025

1400mm long · 4'7"

580mm wide

106mm thick

66litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2024 outline, refined. The 66 L is the same length and width as the 2024 66 L.

66 L against the 2024 66 L, listed length and width.

As listed by JP Australia

JP Australia F-Winger Pro 2025: every size as listed by JP Australia
sizelengthwidththicknessweight
55 L137 cm · 1370 mm560 mm94 mm5.1 kg
66 L140 cm · 1400 mm580 mm106 mm5.5 kg
77 L145 cm · 1450 mm610 mm111 mm5.9 kg

Every size side by side, tails on one line, one scale

145013700 mm137055 L560 w140066 L588 w145077 L610 w

Next to your board?

Lay the JP Australia F-Winger Pro 66 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2024

The 2025 66 L is the same length and width as the 2024 66 L. Open the 2024

listed length and width

2025 66 L over the 2024 66 L, tails aligned, one scale
2025 66 L 2024 66 L

The JP Australia F-Winger Pro over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia F-Winger Pro 2025 from above and from the side, every size at true scale, tails aligned
JP Australia F-Winger Pro 2025 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 55 L outline · derived

51 %wide point, 696 mm from the tail

2.45length over width

511mm wide 12″ from the tail

6,443cm² of planform

Read off the 66 L outline · derived

51 %wide point, 711 mm from the tail

2.38length over width

534mm wide 12″ from the tail

6,916cm² of planform

Read off the 77 L outline · derived

51 %wide point, 736 mm from the tail

2.38length over width

551mm wide 12″ from the tail

7,428cm² of planform

Rocker of the 55 L · scaled from the 66 L measured

48 mmtail rocker, at the tip
6 mm12″ from the tail
15 mm12″ from the nose
84 mmnose rocker, at the tip
416 mmflat to within 3 mm, from 32 % to 62 % of the length
47 %of the length to the lowest point, from the tail
121 mmat its thickest, 64 % from the tail
57 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 66 L · measured

50 mmtail rocker, at the tip
7 mm12″ from the tail
16 mm12″ from the nose
86 mmnose rocker, at the tip
422 mmflat to within 3 mm, from 32 % to 62 % of the length
47 %of the length to the lowest point, from the tail
137 mmat its thickest, 64 % from the tail · on the photo; JP Australia lists 106 mm
58 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 77 L · scaled from the 66 L measured

53 mmtail rocker, at the tip
8 mm12″ from the tail
18 mm12″ from the nose
90 mmnose rocker, at the tip
433 mmflat to within 3 mm, from 32 % to 62 % of the length
47 %of the length to the lowest point, from the tail
143 mmat its thickest, 64 % from the tail
61 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 66 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived