Wing foil

JP Australia, 2026

F-Winger S-TEC 2026

1370mm long · 4'6"

560mm wide

94mm thick

55litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

More tail than most. A round tail, a medium nose and parallel rails.

derived · against the 169 other wing foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia F-Winger S-TEC 2026: every size as listed by JP Australia
sizelengthwidththicknessweight
55 L137 cm · 1370 mm560 mm94 mm4.6 kg
66 L140 cm · 1400 mm580 mm106 mm5 kg
77 L145 cm · 1450 mm610 mm111 mm5.3 kg

Every size side by side, tails on one line, one scale

145013700 mm137055 L558 w140066 L580 w145077 L610 w

Next to your board?

Lay the JP Australia F-Winger S-TEC 55 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia F-Winger S-TEC 2026 from above and from the side, every size at true scale, tails aligned
JP Australia F-Winger S-TEC 2026 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 55 L outline · derived

49 %wide point, 670 mm from the tail

2.46length over width

506mm wide 12″ from the tail

6,395cm² of planform

Read off the 66 L outline · derived

49 %wide point, 685 mm from the tail

2.41length over width

524mm wide 12″ from the tail

6,796cm² of planform

Read off the 77 L outline · derived

49 %wide point, 709 mm from the tail

2.38length over width

548mm wide 12″ from the tail

7,403cm² of planform

Rocker of the 55 L · measured

37 mmtail rocker, at the tip
8 mm12″ from the tail
13 mm12″ from the nose
84 mmnose rocker, at the tip
401 mmflat to within 3 mm, from 34 % to 63 % of the length
52 %of the length to the lowest point, from the tail
120 mmat its thickest, 72 % from the tail · on the photo; JP Australia lists 94 mm
57 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 66 L · scaled from the 55 L measured

39 mmtail rocker, at the tip
8 mm12″ from the tail
14 mm12″ from the nose
86 mmnose rocker, at the tip
406 mmflat to within 3 mm, from 34 % to 63 % of the length
52 %of the length to the lowest point, from the tail
136 mmat its thickest, 72 % from the tail
59 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 77 L · scaled from the 55 L measured

41 mmtail rocker, at the tip
9 mm12″ from the tail
16 mm12″ from the nose
90 mmnose rocker, at the tip
413 mmflat to within 3 mm, from 34 % to 63 % of the length
52 %of the length to the lowest point, from the tail
142 mmat its thickest, 72 % from the tail
61 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 55 L. Tail end set by rule.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived